TL;DR
Get decor and gifts delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
A Hunker report describes a no-sew, awning-style window treatment made with scrap fabric, triangular shelf brackets, fabric glue and trim. The project is intended for spaces where preserving natural light and views matters more than full privacy or shade; exact costs, durability and installation safety depend on the materials and window.
Hunker has featured a no-sew DIY window awning made from scrap fabric, triangular shelf brackets, fabric adhesive and trim, offering an alternative to full curtains or blinds for rooms where homeowners want to retain daylight and views. The project is based on a short video by YouTube creator @taelynkcrosbyart and is presented as a decorative option for spaces such as kitchens and laundry rooms, not as a solution for full privacy or light blocking.
The awning uses a piece of fabric wide enough to span the window and wrap around the sides of a pair of triangular shelf brackets. The other listed materials are strong fabric glue and trim long enough to cover the awning’s lower edge. Hunker names waterproof, non-yellowing Gorilla Fabric Glue as one example; the report does not say it is the only adhesive that would work.
In the described method, the brackets are mounted on either side of the window, and the fabric is draped across and glued to their upper surfaces. The sides are folded around and tucked behind the brackets. After excess fabric is cut away, about an inch is left hanging below the bracket bottoms so trim can conceal the cut edge. The creator’s example used beige striped fabric and lace trim.
Bracket height is a design choice rather than a settled measurement in the report. The creator aligned the bracket bottoms with the top of the window frame, while a commenter and window-treatment blogs cited by Hunker favor lowering the awning so it covers the top of the window. Hunker suggests testing the fabric’s position before gluing it down and moving the brackets if the appearance or coverage is not right.
A Lighter Treatment for Utility Rooms
The project addresses a specific decorating trade-off: full curtains and blinds can reduce light or cover views, while a short awning can add color and soften a window without covering its entire opening. That makes the idea relevant to kitchens, laundry rooms and other areas where occupants may want a decorative finish but do not need complete privacy or shade.
Using leftover textiles may also reduce the amount of new material needed. Hunker suggests repurposing a curtain panel, old bed sheet or rectangular table runner, though the source provides no cost comparison or evidence about how the treatment performs over time. The practical appeal is its limited material list and lack of sewing, but it still requires wall-mounted brackets and a suitable adhesive.
Fabric and trim choices can shift the look from traditional to more minimal or bohemian. A plain neutral fabric and flat trim create a simpler finish, while patterned fabric, linen-like textures, lace or fringe provide more decoration. These are styling suggestions, not claims that a particular combination will suit every room or window.
Popular right now
Ninja CREAMi XL Deluxe 11-in-1 Ice Cream and Frozen Treat Maker with Two 24 oz. Tubs
De'Longhi Classic Signature Espresso Machine with Adjustable Milk Frother
KitchenAid Artisan 5-Quart Tilt-Head Stand Mixer, Almond Cream
As an affiliate, we earn on qualifying purchases.
How the Awning Method Works
Café curtains typically cover only part of a window, while a valance or awning-style treatment sits near the top. Hunker frames the featured project as another way to dress windows that do not require full privacy or shade. Its main distinction from conventional curtains is that the fabric is supported by shelf brackets and secured in place, rather than hung from a curtain rod.
The source’s instructions leave some room for adjustment. It recommends choosing reversible brackets if their long and short sides would affect the desired projection or height, and checking the fabric’s position before applying glue. The report also notes that wall holes from repositioning brackets can be patched. It does not provide window measurements, bracket load ratings, a detailed wall-anchor guide or a test of different fabric weights.
“It “doesn’t involve sewing.””
— Hunker, describing the project
Fit, Coverage and Long-Term Hold
The source does not establish how well the awning works across different window sizes, wall surfaces or fabric weights. It also gives no durability testing, cost estimate, guidance on cleaning the fabric in place or information about whether the adhesive remains secure under heat, humidity or sunlight. Those factors may affect whether the method suits a particular room.
The amount of window covered depends on bracket placement and the fabric’s dimensions. The report presents differing views about height—the creator’s placement and a commenter’s suggestion are not a tested comparison—so the final coverage is a matter for the installer to assess. The treatment is described as decorative; it should not be assumed to provide full privacy, blackout coverage or reliable sun control.
Check Placement Before Gluing
For anyone trying the project, the next step is to measure the window and select brackets that provide the intended projection. Before fastening fabric with adhesive, temporarily drape it across the brackets and check the result from inside and outside the room. The source recommends adjusting the bracket height at this stage if the awning covers too much or too little of the window.
After placement is settled, the fabric can be secured, folded around the sides and trimmed, with the lower edge finished using decorative trim. The report does not identify a scheduled follow-up or product test; no further development is reported. The article’s practical endpoint is a finished decorative covering, with privacy and light-control needs left to the homeowner’s assessment.
Key Questions
What materials does the DIY awning use?
The project calls for two triangular shelf brackets, fabric wide enough to span the window and wrap around the brackets, strong fabric adhesive and trim for the lower edge. Hunker gives waterproof, non-yellowing fabric glue as an example.
Does the project require sewing?
No. Hunker describes the featured method as no-sew: the fabric is glued to the brackets, folded around the sides and finished with trim over the cut lower edge.
Will this awning provide privacy or block sunlight?
The report presents it as a decorative treatment for windows that may not need full privacy or shade. It does not claim the awning provides complete privacy or blackout coverage.
How high should the brackets be mounted?
The source describes different preferences: the creator aligned the bracket bottoms with the top of the window frame, while a commenter suggested lowering them to cover the window’s upper edge. Hunker recommends testing the fabric’s position before gluing it in place.
Can existing household fabric be reused?
Yes. Hunker suggests using a leftover curtain panel, an old bed sheet or a rectangular table runner, provided the fabric is large enough for the window and bracket sides.
Source: hunker.com
